Created to answer a specific design requirement in a Grade I listed building, the Trimless Monopoint creates a minimal Jack Plug point for Precision Lighting’s range of spotlights. Plastering up to the Jack Plug leaves a 19mm hole which can be concealed with a flush decorative cap when not in use. Alternatively, a discreet 62mm finishing canopy can be fitted over the front. This canopy is available in brushed aluminium, rubbed bronze, black and white finishes, with custom finishes available on request.
TECHNICAL
CATEGORY: IP20 MATERIAL: Machined Aluminium SYSTEM: Jack Plug Connector LV RATING: 75W Max at 12V LED RATING: 150W Max at 24V CUT OUT HOLE: ø45mm MIN. CEILING VOID: 55mm MAX. MATERIAL THICKNESS: 40mm LV CONNECTION: Blue Crimp [not terminal block] ACCESSORIES: Canopy | Solid Canopy | Plug WEIGHT: 135g
The Surface Monopoint is designed for use on beams, walls and ceilings, where the Jack Plug system cannot be recessed into the mounting surface. It is powered by a remote transformer, and is available in brushed aluminium, rubbed bronze, black and white, with custom finishes available on request. Ideal for use with a BESA box. There is an option side exit cable channel that can be exposed on site with a metal file.
TECHNICAL
CATEGORY: IP20 MATERIAL: Machined Aluminium FINISH: Brushed Aluminium | Black | White | Rubbed Bronze* | Custom SYSTEM: Jack Plug Connector LV RATING: 75W Max at 12V LED RATING: 150W Max at 24V CUT OUT HOLE: N/A MIN. CEILING VOID: N/A MAX. MATERIAL THICKNESS: No Limit FIXING DISTANCE: 50mm ACCESSORIES: Plug WEIGHT: AL | BK | WH – 90g | RB – 210g
Stacko Tilt Fixed End is a Constant Current miniature display lighting product. It has four beam distributions and is a part of the modular Stacko Collection allowing users to ‘stack’ products together to create unique lighting set-ups that comes as standard in white, black and brushed aluminium. There are 3 light engines totalling 306lm | 3.36W. Each narrow beam in our 102lm light engine has a peak intensity of 794cd. This ‘End’ module closes the circuit and does not accept further modules. There can only be a maximum of 10 light engines per Stacko circuit or driver. The luminaire is compatible with our Minipoint system that enables a plug and play setup where luminaires can be swapped to suit changing lighting requirements.
TECHNICAL
IP RATING: IP20 MATERIAL: Machined AL 6063-T6 | Machined Brass FINISH: Brushed Aluminium | White RAL9010 | Matte Black Anodised | Rubbed Bronze* | Polished Brass* | Brushed Brass * | Polished Nickel* MOUNTING: Minipoints CUTOUT: ø18mm (0.71″) minipoint CEILING THICKNESS: 30mm (1.18″) max PAN: 360˚ WEIGHT: 88g | 0.19lb WATTAGE: 3.36W FORWARD VOLTAGE: 9.6V DRIVE CURRENT: 350mA SUPPLY TYPE: Constant Current DRIVER LOCATION: Remote DIMMING: DALI | 0-10V | 1-10V WARRANTY: 5 Years LISTING CONFORMITY: ETL USA & Canada, UKCA, CE Europe
Stacko Straight Fixed is a Constant Current miniature display lighting product. It has four beam distributions and is a part of the modular Stacko Collection allowing users to ‘stack’ products together to create unique lighting set-ups that comes as standard in white,black and brushed aluminium. There are 5 light engines totalling 102lm | 5.60W.. This ‘End’ module closes the circuit and does not accept further modules. There can only be a maximum of 10 light engines per Stacko circuit or driver.The luminaire is compatible with our Minipoint system that enables a plug and play setup where luminaires can be swapped to suit changing lighting requirements.
Power: 5.60W Accessories: N/A Dimming: DALI | 0-10V | 1-10V | Casambi Light Engines: Standard Delivered Output: Up to 94lm
Stacko Multi-Aim 3 is a Constant Current miniature display lighting product. It has four beam distributions and is a part of the modular Stacko Collection allowing users to ‘stack’ products together to create unique lighting set-ups that comes as standard in white,black and brushed aluminium. There are 3 light engines totalling 102lm | 3.36W.. This ‘End’ module closes the circuit and does not accept further modules. There can only be a maximum of 10 light engines per Stacko circuit or driver.The luminaire is compatible with our Minipoint system that enables a plug and play setup where luminaires can be swapped to suit changing lighting requirements.
Power: 3.36W Accessories: Snoots Dimming: DALI | 0-10V | 1-10V | Casambi Light Engines: Standard Delivered Output: Up to 94lm
Stacko Aim is a Constant Current miniature display lighting product. It has four beam distributions and is a part of the modular Stacko Collection allowing users to ‘stack’ products together to create unique lighting set-ups that comes as standard in white,black and brushed aluminium. There is 1 light engine totalling 102lm | 1.12W.. This ‘End’ module closes the circuit and does not accept further modules. There can only be a maximum of 10 light engines per Stacko circuit or driver.The luminaire is compatible with our Minipoint system that enables a plug and play setup where luminaires can be swapped to suit changing lighting requirements.
Power: 1.12W Accessories: Snoots Dimming: DALI | 0-10V | 1-10V | Casambi Light Engines: Standard Delivered Output: Up to 94lm
Solo 16 Surface is a Constant Current single source LED spotlight that is machined from aerospace grade aluminium 6063-T6 and comes as standard in white, black and brushed aluminium along with three premium brass finishes. It has five site-changeable optics for flexible beam distribution and 360° lockable pan and 90° constant torque tilt.. An accessory holder is available separately that can accommodate 55mm (2.16″) lenses and louvers. This product requires an external 700mA 12V Constant Current LED driver.
Power: 8.40W Accessories: Lenses | Louver Dimming: DALI | 0-10V | 1-10V | Casambi Light Engines: Intense | Plus Delivered Output: Up to 1127lm
Solo 16 Stucchi is a Constant Voltage single source LED spotlight that is machined from aerospace grade aluminium 6063-T6 and comes as standard in white, black and brushed aluminium along with three premium brass finishes. It has five site-changeable optics for flexible beam distribution and 360° lockable pan and 90° constant torque tilt. An accessory holder is available separately that can accommodate 55mm (2.16″) lenses and louvers. This product requires an external 48V Constant Voltage LED power supply.
Power: 8.40W Accessories: Lenses | Louver Dimming: DALI | 0-10V | 1-10V | Casambi Light Engines: Intense | Plus Delivered Output: Up to 1127lm
Solo 11 Surface is a Constant Current single source LED spotlight that is machined from aerospace grade aluminium 6063-T6 and comes as standard in white, black and brushed aluminium along with three premium brass finishes. It has five site-changeable optics for flexible beam distribution and 360° lockable pan and 90° constant torque tilt.. An accessory holder is available separately that can accommodate 37mm (1.45″) lenses and louvers. This product requires an external 350mA 12V Constant Current LED driver.
Power: 4.20W Accessories: Lenses | Louver Dimming: DALI | 0-10V | 1-10V | Casambi Light Engines: Intense Delivered Output: Up to 413lm
Solo 11 Stucchi is a Constant Voltage single source LED spotlight that is machined from aerospace grade aluminium 6063-T6 and comes as standard in white, black and brushed aluminium along with three premium brass finishes. It has five site-changeable optics for flexible beam distribution and 360° lockable pan and 90° constant torque tilt.. An accessory holder is available separately that can accommodate 37mm (1.45″) lenses and louvers. This product requires an external 48V Constant Voltage LED power supply.
Power: 4.20W Accessories: Lenses | Louver Dimming: DALI | 0-10V | 1-10V | Casambi Light Engines: Intense Delivered Output: Up to 413lm
